Name: Rmstator Rmstator Generator Stator 900W Dual Output
Brand: Rmstator
SKU: AD225242
Price: 329.89 USD
Availability: InStock

Rmstator Rmstator Generator Stator 900W Dual Output

(No reviews yet) Write a Review

$329.89

SKU:

AD225242

Condition:

New

Description

Brand new aftermarket generator stator

Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Connectors included
Rubber grommet included
All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 126 mm
Thickness: 20 mm
Length of wires stator to grommet: 120 mm
Length of wires grommet to plug: 550 mm

Other specifications:
Number of wires: 6
Number of plugs: 2
Number of pins: 6
Number of poles: 18
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.7 ohms +/-20%
Alternator: Black to Black = 0.7 ohms +/-20%

Before installing your new generator stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010"".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Vehicle Fitments