Radius Rods
Radius rods are the links that locate a snowmobile's front suspension: upper and lower rods run from the bulkhead out to the spindle, and together with the shock they control camber, toe, and how the ski tracks through a corner. Bend one on a stump or a hidden rock and the sled darts, pushes in turns, or wears the inside of a carbide. Because they are the cheapest part in the front end and the first thing to take a hit, a spare set in the trailer is a common carry.
Upper vs lower, left vs right. Rods are sold by position. This page carries SPI upper and lower radius rods for popular sleds; match the SPI part number to your model and year using the fitment list on each product, and note that many sleds use different rod lengths on the upper and lower positions, so replace the bent one with the correct position rather than "whatever fits." Replace rods in pairs when the other side has been through the same impact — a rod can be bent enough to change alignment without looking obviously crooked.
Worn bushings feel like bent rods. If the front end is vague and the rods measure straight, the rubber or plastic bushings at the rod ends are usually the culprit. SPI's radius rod bushing kits for Polaris restore the pivots without replacing the rods, and the EPI Performance radius rod end handles a worn heim or ball end on sleds that use them.
Check the rest of the front end. A hit hard enough to bend a radius rod often takes the tie rods, ball joints, or A-arms and components with it, and every rod swap should end with a toe alignment. After the parts are in, set the skis straight and re-torque the rod bolts once the sled has been ridden.
Free shipping on orders $50+ (Lower 48).