Ski-Doo Tundra, Nordik & More SPI Defender Hardweld Runners
Part # WB-000-476
$49.04
Free Shipping on Orders Over $50 to the Lower 48 States
- SKU:
- UPC:
- Weight:
Details
| Brand | SPI |
|---|---|
| Part number | WB-000-476 |
| Condition | New |
Description
7/16in. Carbon steel host bar, with a flat top to prevent bar roll during aggressive cornering
Carbides are made of yg13 tungsten that provides the ultimate tensile strength for extreme durability and hardness to reduce chipping and increase longevity
The 90 degree angle of carbide into the pocket of our runners makes for very large cross sections compared to other designs
1in. Carbide segments allow for flex in ski without compromising carbide adhesion
Engineered and test fitted to precisely fit your ski for easy install
Chamfered ends to reduce catching when backing up and unloading
Extended studs to allow for ski skins
All necessary fastening nyloc nuts included
All carbides and wearbars are finished in black rust preventative
Many competitors use a design that is mounted very shallow in the host bar
Our diamond shaped carbides are set deeper into the host bar giving it more surface contact adhesion. This will make it less susceptible to side impact failure from rocks or gravel
RUNNER STYLE: Defender
Features hardweld on contact area of host bar, giving it more depth to increase longevity.
Less damaging to concrete and asphalt surfaces.
Carbides are made of yg13 tungsten that provides the ultimate tensile strength for extreme durability and hardness to reduce chipping and increase longevity
The 90 degree angle of carbide into the pocket of our runners makes for very large cross sections compared to other designs
1in. Carbide segments allow for flex in ski without compromising carbide adhesion
Engineered and test fitted to precisely fit your ski for easy install
Chamfered ends to reduce catching when backing up and unloading
Extended studs to allow for ski skins
All necessary fastening nyloc nuts included
All carbides and wearbars are finished in black rust preventative
Many competitors use a design that is mounted very shallow in the host bar
Our diamond shaped carbides are set deeper into the host bar giving it more surface contact adhesion. This will make it less susceptible to side impact failure from rocks or gravel
RUNNER STYLE: Defender
Features hardweld on contact area of host bar, giving it more depth to increase longevity.
Less damaging to concrete and asphalt surfaces.
Fits
- 1991, 1993-1995 Ski-Doo Alpine II (Family 476)
- 1979-1981 Ski-Doo Blizzard 5500 (Family 476)
- 1981-1984 Ski-Doo Blizzard 5500 MX
- 1978 Ski-Doo Blizzard 6500 Plus
- 1979-1981 Ski-Doo Blizzard 7500 Plus
- 1982 Ski-Doo Blizzard 9500 (Family 476)
- 1979-1981 Ski-Doo Blizzard 9500 Plus
- 1983-1984 Ski-Doo Blizzard 9700 (Family 476)
- 1977-1979 Ski-Doo Everest 340 (Family 476)
- 1977-1979 Ski-Doo Everest 340E
- 1974-1979 Ski-Doo Everest 440 (Family 476)
- 1976-1979 Ski-Doo Everest 440E
- 1980-1983 Ski-Doo Everest 500 (Family 476)
- 1980-1983 Ski-Doo Everest 500E
- 1980-1983 Ski-Doo Everest L/C
- 1982-1983 Ski-Doo Nordik (Family 476)
- 1988-1990 Ski-Doo Nordik 50 (Family 476)
- 1988-1990 Ski-Doo Nordik 60 (Family 476)
- 1976-1977 Ski-Doo Olympique 300S (Family 476)
- 1976-1978 Ski-Doo Olympique 300T (Family 476)
- 1976-1979 Ski-Doo Olympique 340 (Family 476)
- 1976-1979 Ski-Doo Olympique 340E (Family 476)
- 1976 Ski-Doo Olympique Plus (Family 476)
- 1977-1978 Ski-Doo RV 340 (Family 476)
- 1984-1988 Ski-Doo Safari 377
- 1984-1988 Ski-Doo Safari 377E
- 1984-1985 Ski-Doo Safari 447 (Family 476)
- 1983-1984 Ski-Doo Skandic 277 (Family 476)
- 1982-1985 Ski-Doo Skandic 377 (Family 476)
- 1973 Ski-Doo TNT 294 (Family 476)
- 1973-1977 Ski-Doo TNT 340 (Family 476)
- 1973-1975 Ski-Doo TNT 440 (Family 476)
- 1985-1993, 1999 Ski-Doo Tundra (Family 476)
- 1994 Ski-Doo Tundra II
- 1994-1998 Ski-Doo Tundra II LT
- 1986-1993 Ski-Doo Tundra LT
- 1998-1999 Ski-Doo Tundra R
Part Number: WB-000-476
Shipping & returns
Free Shipping on Orders Over $50 to the Lower 48 States
No Hassle Returns
$49.04
