EBC High Tensile Rotor Bolt Set 6Pc DB401/6

• One set of bolts includes one per bolt hole in your rotor.
• Bolts made in 10.9 Medium Carbon steel, quenched and tempered.(SAE J429/ASTM 324BD)
• Fitted with thread lock to ensure they remain tight
• See the owner’s manual for the correct torque setting

When installing a new rotor, be sure to clean the hub mounting face and remove all corrosion and dirt so that the rotor sits FLAT.

Spin the wheel in the axle/fork leg to ensure it is running true.

If any runout, remove bolts and check the hub again for cleanliness, rotate the rotor/disc one bolt hole and try again.

Apply fresh threadlock when removing bolts after first fitting, as the threadlock on our bolts will be degraded to a degree.

Part Number: DB401/6